Investigation of superfast deposition of metal oxide and Diamond-Like Carbon thin films by nanosecond Ytterbium (Yb+) fiber laser - Université d'Angers Accéder directement au contenu
Article Dans Une Revue Optical Materials Année : 2013

Investigation of superfast deposition of metal oxide and Diamond-Like Carbon thin films by nanosecond Ytterbium (Yb+) fiber laser

V. Serbezov
  • Fonction : Auteur
S. Sotirov
  • Fonction : Auteur
K. Benkhouja
  • Fonction : Auteur
Anna Zawadzka
  • Fonction : Auteur
Bouchta Sahraoui

Résumé

Metal oxide (MOx, M: titanium, magnesium) and Diamond-Like Carbon (DLC) thin films were synthesized by Pulsed Laser Deposition (PLD) at room temperature and low vacuum of 2 Pa for MOx and vacuum of 4 x 10(-3) Pa for DLC films. A fiber based Ytterbium (Yb+) laser operating in the nanosecond regime at a repetition rate of 20 kHz was used as an ablation source. Dense and smooth thin films with a thickness from 120 to 360 nm and an area of up to 10 cm(2) were deposited on glass and stainless steel substrates at high growth rates up to 2 nm/s for a laser intensity of 10-12 J/cm(2). The thin films synthesis was compared for two fiber laser modes of operation, at a repetition rate of 20 kHz and with an additional modulation at 1 kHz. The morphology, chemical composition and structure of the obtained thin films were evaluated using optical microscopy, Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX) and Raman spectroscopy. The morphology of the MOx thin films and the deposition rate strongly depend on the fiber laser mode of operation. Very smooth surfaces were obtained for the metal oxide thin films deposited at lower deposition rates in the modulation mode at 1 kHz. The effect of the substrate on the DLC film structure was studied. The films deposited on dielectric substrates were identified as typical tetrahedral (ta-C) DLC with high sp(3) content. DLC films on metal substrates were found typical a-C amorphous carbon films with mixing sp(2)/sp(3) bonds.

Domaines

Chimie
Fichier non déposé

Dates et versions

hal-03344718 , version 1 (15-09-2021)

Identifiants

Citer

V. Serbezov, S. Sotirov, K. Benkhouja, Anna Zawadzka, Bouchta Sahraoui. Investigation of superfast deposition of metal oxide and Diamond-Like Carbon thin films by nanosecond Ytterbium (Yb+) fiber laser. Optical Materials, 2013, 36 (1), pp.53-59. ⟨10.1016/j.optmat.2013.05.015⟩. ⟨hal-03344718⟩
20 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More